Root Lenovo Tab 2 A7-10F (WiFi) and Install TWRP Recovery 3.5.2

If you have a Lenovo Tab 2 A7-10F (WiFi) tablet and you also want to root your device, then you are at the right page. This guide is only for devices with the MediaTek MT8127 processor. Thanks to veteran XDA member pix106 for posting the TWRP 3.5.2 update for the Lenovo Tab 2.

If you are an Android lover and want to root and restore TWRP on your beloved device, then you have landed on the right page. In this article, we will walk you through the process of rooting the Lenovo Tab 2 A7-10F (WiFi) tablet.

TWRP offers an attractive hardware design and user interface (UI). By following this guide, you can install the latest TWRP for Lenovo Tab 2 A7-10F Tablet (WiFi). You can download TWRP Recovery from the links in the sample section of this article. Please note that this is an unofficial TWRP recovery and is only for the Lenovo Tab 2 A7-10F (WiFi) tablet (Confirm model by going to Settings>About). The process described below is only for rooting and installing TWRP on Lenovo Tab 2 A7-10F Tablet (WiFi), please do not test this method on any other device.

If you want to unleash the full potential of your Lenovo Tab 2 A7-10F (WiFi), the main task is to root and flash custom recovery features like TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a rooted device and a flashed TWRP recovery, you can install any custom ROM, modules, kernels, Xposed, etc, as well as many applications that require access with superuser privileges to function properly. You can easily power your device with the One Click Android Root Tool, either via PC or APK, which is a quick process.

ALWAYS be careful when rooting the Lenovo S5 Pro GT and installing TWRP Recovery.

Brief information and benefits of TWRP recovery

TWRP (Team Win Recovery Project) is an open source community development project. When you flash TWRP, your device can install any custom firmware, install tablet firmware, install mod zip files for settings, Xposed modules for custom features, one-click root processes and provisioning processes. You can also make a full backup of Nandroid and restore it later, flash the image file with one click, remove bloatware, overclock and underclock. With TWRP, you can easily erase, cache and clear data after flashing an image file to reflect changes and correct minor errors caused by caching.

To install TWRP on the Lenovo Tab 2 A7-10F (WiFi) tablet, you must have the Bootloader installed and unlocked. This means that you first need to unlock the bootloader to root the device, and also perform a configuration.

Denial: Although AndroidWeblog.com covers everything very clearly so that our readers get exactly what they want, there is always a small chance that major problems may arise from the steps listed here. It is therefore in the user’s interest to follow the instructions carefully in order to avoid any incident with the device.

Rooting and flashing a custom ROM will definitely invalidate your device’s warranty and AndroidWeblog.com cannot be held responsible in any way for invalid warranties or tinkered with devices.

Condition

Check the model number, which should be as follows:

  • Lenovo Tab 2 A7-10F (WiFi)

You should make sure you read the disclaimer carefully before you root your tablet and agree to do so at your own risk.

The tablet must be at least 70% charged, otherwise complications may occur during the experiments. Don’t take any chances and charge it fully.

If you want to rotate the tablet or install a custom ROM, it’s a good idea to make a backup of the tablet. Back up all your media like photos, videos and everything on your PC, as well as your contacts to the cloud.

(Applies to the PC method only, skip this step if you are using the APK method).

You must enable the USB debugging option by going to Settings, Apps and Development Options.

downloads rooting Lenovo Tab 2 A7-10F Tablet (WiFi)

Download the universal ADB drivers here (if the drivers are already installed on your PC, you can skip this step).

ALWAYS KNOW how to root the Lenovo Vibe S1 and install TWRP Recovery.

Download the Platform Tools/ SDK Tools package with Android SDK on PC from here. (Android Command Line Tools> Package SDK Tools)

Download TWRP recovery for Lenovo Tab 2 A7-10F Tablet (WiFi) here:

TWRP Recovery 3.5.2

Download SuperSU from Chainfire from here.

Download Magisk Manager from here.

Make sure you have downloaded the required files (link in the Requirements section of this article). Then continue with the next steps.

Steps to unlock the bootloader of the Lenovo Tab 2 A7-10F tablet (WiFi)

Message: If you already have the bootloader unlocked, you can skip these steps.

Step one: First, you need to connect your Lenovo Tab 2 A7-10F (WiFi) to your computer in quick start mode. You can reboot the device for a quick start with a command in the ADB terminal:

Reset advertising

Step two: Now open the Adb terminal on the PC and just enter this command:

Quick download of OEM unlock

Step three: Then give this order:

Quick download of OEM unlock

At this point, your device will automatically reboot. You can now unlock the Lenovo Tab 2 A7-10F Tablet (WiFi) because the bootloader of your device is already unlocked.

Steps to flash/install TWRP on Lenovo Tab 2 Tablet A7-10F (WiFi)

Step one: Let’s assume that you have already downloaded the Android SDK platform tools (SDK Manager) on your PC. The platform tools include the necessary ADB binaries and quick downloads.

Step two: Make sure the drivers are installed on your computer. Then proceed to the next step.

Message: If USB development and debugging settings are already enabled on your device, as suggested in the Benefits section, skip steps 3 and 4 and follow step 5 directly.

Step three: Now activate the developer settings on your Lenovo Tab 2 A7-10F Tablet (WiFi) device. To do this, go to Settings -> About and find the build number, then click on the build number 7 times, which will activate the developer settings on your device.

Step four: If you already have USB debugging, you can skip this step. If not, open the developer settings and enable the USB debugging option.

Step 5: Now open a command prompt on the ADB computer/terminal and just type the command :

Reset advertising

Step six: The device must not be put into the quick start mode. Now copy the TWRP.img file downloaded in the required section to the same folder where the ADB and rapidboot binaries are located. Rename the file to twrp.img and enter this command:

Quick start Flash recovery twrp.img

then run this command, enter :

quick restart

Step 7 (important): On some devices, custom recovery may not be automatically replaced on first boot. You can search for a Google shortcut to put the device into recovery mode. After executing the quick restart command, hold down the appropriate key combination to enter TWRP mode. Once the device is booted into TWRP mode, TWRP automatically corrects the stock ROM to prevent TWRP from being overwritten by the stock restore.

ALWAYS read how to root the Realme 2 RMX1811 and install TWRP Recovery 3.2.3

After entering the fast restart command, hold down the combination key and start in TWRP. Once TWRP is loaded, TWRP will patch the ROM to prevent TWRP from replacing the ROM. If you do not perform this step, you will need to restart the installation.

Procedure for Lenovo Root Tab 2 Tablet A7-10F (WiFi)/Installing Magisk or SuperSU

Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then continue with the next steps.

Warning: You can use Magisk Manager or Super SU, but only one, so choose wisely. Go to Magisk Manager if you are not sure.

Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory/SD card of your Lenovo Tab 2 A7-10F tablet (WiFi).

Step two: Just get started on the recovery. You can also make a ROM backup via the TWRP interface. However, I recommend that you make a backup copy of the ROM. Because if the process fails, you can flash the ROM.

Step three: Press Install, then navigate to the SuperSU.zip or magisk.zip file and drag the firmware confirmation file (located at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.

Congratulations, you now have a Lenovo Tab 2 A7-10F (WiFi) and TWRP has been flashed. You can now install the Xposed Framework and customize your tablet. If you want to check it, you can download and check the root status through the Root Checker application.

Leave a Reply

Your email address will not be published. Required fields are marked *